Home > Electric Fencing > Electric Fencing Supplies > Hi-Tensile Fencing Products

... < back
Hi-Tensile Fencing Products

PIN LOCK WOOD POST INSULATOR
This black, high density polypropylene insulator performs in all climates. The attached pin locks and unlocks fence wire for ease of installation and enables the wire to be dropped readily. Its heavy duty construction withstands the pressure of hi-tensile fencing.

#3038 – Pin Lock Insulators 25/Bag
$10.85 CAD


WIRE STAND-OFF with PINLOCK INSULATOR
Pinlock wire outrigger is ideal for installing electric fencing onto existing non-electrified fences. Constructed from high tensile galvanised steel with UV stabilised pinlock insulator for easy wire insertion and removal.

#3038A – Pinlock Wire Outrigger
$3.50 CAD


TENSION SPRING
Tension springs have multiple uses. They act as a shock absorber by damping damaging blows to the fence. They also help maintain uniform tension of the fence wires through the heat and the cold. In addition, they can help indicate the amount of tension on the wires.

#2047 – Tension Spring
$10.00 CAD

WIRE TIGHTENER
This heavy duty zinc plated metal strainer performs in all weather conditions. It
is installed without splicing wire. An economical strainer tool is also available.

#3039 – Tightener
$4.00 CAD

WIRE STRAINER TOOL
This tool is in conjunction with #3039 wheel tensioners. The Wire Strainer Tool (#3040) is inserted into wheel and is used to turn the wheel to tighten the fence wire.

#3040 - Wire Strainer Tool
$17.50 CAD


WRAP AROUND INSULATOR
Unit consists of 19" poly tubing and a 19 1/2" galvanized steel strip. Flat side
of tubing fits tight against a post. Ideal for tying off at fence ends.

#3041 - Wrap Around Insulator
$1.25 CAD


GRIPPLE
Joins, secures and tightens wire in seconds. Easy to use. Saves time and effort and is reusable. Use #3032A to tighten.

#3023 - Gripple
$1.99 CAD


TENSULATOR
The Tensulator is a 4-in-one device that joins, tensions, anchors and insulates electric fencing. This system installs four times faster than traditional methods, is easy to use, can be tensioned and re-tensioned and is made from non-corrosive components for insulation and longer life. Once installed it maximizes the life of the wire by retaining its tension, insulates the wires from each other and acts as an anchoring device to the end post.

#3023B - Tensulator (Each)
$3.60 CAD

TENSIONING TOOL
Tensioning tool for use with Gripples (#3023), Tensulators, and Wire Rope Grips (#3022). Easier tensioning up to 400kg (800lbs) with 6:1 gear drive and mechanical advantage. Lightweight (only 750g), ergonomic, compact and easy to carry. Durable, made from hardened steel and engineering grade polymer.

#3023A – Gripple Tightening Tool
$97.50 CAD


CABLE CLAMP
These clamps are used to connect wire strands and are resuable.

#3025A – Cable Clamp (each)
$0.20 CAD


SPLIT BOLT
These stainless steel split bolts are used to connect wire strands and are resuable.

#3025B – Split Bolt (each)
$1.90 USD


NICOPRESS WIRE TAP
Not a splice. Used to make all electrical positive and negative connections.

#3024 – Nicrpress Wire Taps 100/Box
$48.50 CAD


NICROPRESS CRIMPING TOOL
Multi-groove hand tool for pressing sleeves and line taps.

#3024A - Crimping Tool
$49.95 CAD

 



LIGHTNING CHOKE
Protects your charger from high voltage damage during electrical storms.

#3047 - Lightning Choke
$24.50 CAD


GROUNDING PRODUCTS

#3048 – Ground Rod 3/4" x 6'
$14.00 CAD

#3049 – Ground Plate
$16.00CAD

#3050 – Ground Clamp
The most common failure of electric fencing is poor connection at the ground rod. This 3/8" single bolt bronze clamp guarantees proper connection. Used with #3048 or #3049.
$4.90 CAD

GATE HANDLES
This spring gate handle has an extra heavy hook and lots of hand grip.

#3021 - Gate Handle
$2.75 CAD

RUB'R GATE HANDLES
RUB’RGATE soft pliable rubber outer case internally reinforced with semi-rigid, non-conductive vinyl inner tube. This provides a firm grip and acts as an extra layer of insulation. Generous, sensibly spaced flanges allow plenty of hand room. Large, heavy stamped steel plated safety hook. Enclosed spring stretches 3½” to keep wire taut.

#3021D - RUB'R Gate Handle
$2.95 CAD

OLD IRON SIDES GATE HANDLES
Safety hook and body formed as one from 7/8” diameter steel pipe. Spring mechanism consists of 41/4” long compression spring fastened to a 5/16” diameter eyebolt. All metal parts permanently assembled using 20 tons of force. No flimsy snap-on/push-on fasteners used anywhere. Large insulating grip measures 5 1/8” long with a 2 1/4” diameter flange for extra shock protection. Molded of a soft flexible material that will not chip, crack or break when abused. Performs in any climate. Metal parts plated to resist rust. Molded grip contains carbon black to deter UV rays. The heaviest, toughest DARE electric fence gate handle ever.

#3021C - Gate Handle
$4.95 CAD


UNDERGROUND HOOK-UP WIRE
This double insulated, polypropylene covered 12.5 gauge wire is available in 165' rolls. It has many uses: under driveways, gate entrances or to insulate one wire from another.

#3052 – Hook-Up Wire 12.5 ga. (165' Roll)
$58.00 CAD


PORTABLE FIBERGLASS FENCE POSTS
These lightweight and highly flexible fibreglass rods are a quick, easy and economical solution to your temporary fencing or strip grazing needs. These fibreglass rods are made of continuous glass filaments and durable resin with sun guard ultraviolet protective coating.

#3030A – 11/16" x 48"
$5.75 CAD


#3030 – 11/16" x 60"
$7.85 CAD

#3030F – 11/16" x 72" Drilled
$9.50 CAD

#3030C – 11/16" x 96"
$10.95 CAD

#3031 – 7/8" x 60"
$11.00 CAD

#3031B – 7/8" x 72"
$13.75 CAD

#3076 - 7/8" x 72" Rise Dip Post w/adapter
$35.00 CAD

HELIX ANCHOR
Galvanized screw-in helix anchor (4" x 24") 5/8" shaft. Pull out strength is 4,000 lbs. Used to tie back corner braces in difficult ground (rocky/gravel soil).

#3033 - Helix Anchor
$18.50 CAD

ELECTRIC FENCE WARNING SIGNS
These signs are made of highly visible, bright yellow vinyl with bold black lettering. There are corner holes for wiring to fence or nailing to post.

#3032 – Regular Sign
$1.55 CAD



DIGITAL ELECTRIC FENCE TESTER
Suitable for measuring between 100volts and 9900volts.

#3009 - Digital Electric Fence Tester
$90.00 CAD

ANALOGUE ELECTRIC FENCE TESTER
Professional analogue electric fence tester. Premium quality for electric fences and energizers including low impedance models. Easy to read display, no battery required. Bonus! Storage pouch included.

#3009A - Analogue Electric Fence Tester
$85.00 CAD

FIVE O-LITE ELECTRIC FENCE TESTER
Standard 5 Light Fence Tester, for use with fence energizers with peak voltage of up to 5000 V. Lights glow in sequence to indicate approximate voltage. 1000V to 5000V readings

#3008 - Five O-Lite Electric Fence Tester
$15.00 CAD

  .. < back
. home