Properly installed electric bear fencing provides safety for personnel, prevents damage to property and eliminates costly work stoppages. Electric fencing has proven an effective tool for honey producers, camps for resource industries, military, agricultural applications, recreation, and temporary camps. Margo Supplies fencing systems are quick and easy to erect and are proven to be very effective.

Below is a comprehesive catalog of all the items for all of our fencing systems.

More Information

7/8" CORNER/END BRACE ASSEMBLY
To maximize wire tension, this 7/8" diameter fibreglass post brace assembly comes complete with 72" upright and 60" diagonal posts and all necessary hardware. This brace system enables the wire to be installed guitar string tight so that it easily separates the hair and delivers the electric shock to the bear's hide.

#3034 - 7/8" Corner/End Brace Assembly
$36.25 USD

More Information

11/16" CORNER/END BRACE ASSEMBLY
To maximize wire tension, this 11/16" diameter fibreglass post brace assembly comes complete with 60"" upright and 48" diagonal posts and all necessary hardware. This brace system enables the wire to be installed guitar string tight so that it easily separates the hair and delivers the electric shock to the bear's hide.

#3030E - 11/16" Corner/End Brace Assembly
$18.00 USD

The below fibreglass posts are typically used with Hi-Tensile fences.

2" U-CLIP
For use with drilled fibreglass posts. Clip slides onto holes drilled in post and holds wire in position. They reusable are easily installed with a pair of ordinary pliers or by hand.

#3069 - 2" U-Clip
$0.26 USD

SNAPMAX SPRING CLIP
A galvanized wire clip for use with fibreglass posts. Clip slides onto post and stays in position. They are easily installed with a pair of ordinary pliers or by hand.

DARE SPIN-ON INSULATORS
These screw tight insulators can be adjusted to height while current is on. There is generous water run-off space and insulators will fit 1/4" to 9/16" round posts.

#3037 – Spin-On Insulators 25/Bag
$5.60 USD

DARE SUCKER ROD INSULATORS
Holds wire or polytape up to 1½" wide. These spin-on insulators can be adjusted to any height while current is on. Prime high density polyethylene with UV inhibitor. There is generous water run-off space and insulators will fit 1/4" to 7/8" round posts. No tools required.

#3037A – Sucker Rod Insulators 25/Bag
$15.00 USD

HEAVY DUTY NAIL-ON INSULATOR
This two-nail insulator has adequate water run-off space and a heavy flange to prevent shorting to wet posts.

#3036– Nail-On Insulator 25/Bag
$6.00 USD

PIN LOCK WOOD POST INSULATOR
This black, high density polypropylene insulator performs in all climates. The attached pin locks and unlocks fence wire for ease of installation and enables the wire to be dropped readily. Its heavy duty construction withstands the pressure of hi-tensile fencing.

#3038 – Pin Lock Insulators 25/Bag
$10.85 USD

PIN LOCK WRAP AROUND INSULATOR
Made from durable black UV-resistant plastic, this insulator is idea for any wood or steel posts.

#3038B – Pin Lock Wrap Around Insulators 10/Bag
$8.50 USD

WIRE STAND-OFF with PINLOCK INSULATOR
Pinlock wire outrigger is ideal for installing electric fencing onto existing non-electrified fences. Constructed from high tensile galvanised steel with UV stabilised pinlock insulator for easy wire insertion and removal.

#3038A – Pinlock Wire Outrigger
$3.50 USD

WRAP AROUND INSULATOR TUBE
Heavy duty 2.35mm insulation resists cutting from fence wire or staple and is UV resistent. Tube will fit wire diameters up to 12.5 ga. high tensile wire. 30,000 volt rated insulation.

#3043 - Wrap Around Insulator Tube 10/Bag
$10.50 USD

WRAP AROUND INSULATOR
Unit consists of 19" poly tubing and a 19 1/2" galvanized steel strip. Flat side
of tubing fits tight against a post. Ideal for tying off at fence ends.

#3041 - Wrap Around Insulator
$1.25 USD

BAYGARD PORTABLE ELECTRIC FENCE WIRE
Baygard is a patented lightweight and portable electric fence wire. It is easy to use, making it ideal for a number of temporary applications, including pasture management and rotational grazing.

BAYGARD PLATINUM HIGH VISIBILITY EQUI-TAPE
Ideal for deer! Five strands of high conductive aluminum wire, and multi strands of light reflective, heavy-duty reinforced fiberglass cords. Silver metallic high reflective color reflects light for superior visibility. Will not sag on fence in hot weather and does not require tensioners.

BAYGARD HIGH VISIBILITY FENCE TAPE
Baygard HV is a wide electric fence tape providing high visibililty and excellent conductivity - ideal for hard to control animals such as horses and sheep. Also proven effective on bears and other predators. This premium performance wire is ideal for strip or rotational grazing, creating temporary pastures, old fence rehabilitation and wildlife control.

#3010D – Fence Tape 100m Roll
$27.75 USD

#3010E – Fence Tape 200m Roll
$66.15 USD

GALVANIZED STRANDED WIRE
This product has a breaking strength of 1000+ lbs. This is an important feature because a deterred, retreating bear must not be able to break the wire. This galvanized wire is rust resistant and will continue to be an excellent conductor of electricity for years even in permanent applications.

#3020 Winder/Spool

#3020A Winder/Spool

WIRE WINDER SPOOLS
Standard wire winder spool with handle. Spool capacity is approximately 300m when using stranded galvanized wire and 500m when using Baygard wire.

#3020 – Winder/Spool (spool capacity is 300 m)
$16.00 USD

Heavy duty Reel Easy™ wire winding system. Unique patented snap on/off handle turns every Reel Easy Cartridge into a light weight, portable reel for dispensing or rewinding wire. The handle features rugged metal construction and durable plastic cartridge. Spool capacity is 500 m when using stranded galvanized wire, and 800 m when using Baygard wire).

#3020A – Heavy Duty Reel Easy Winder/Spool (Includes Handle)
$69.95 USD

#3020B – Heavy Duty Reel Easy Spool Only
$9.75 USD

ELECTRA NETTING (30' x 36") BEAR FENCE
Electra positive/negative netting is fast and easy to install. Features stainless steel conductors, double pin step-in posts and semi-rigid vertical stays. This pentagon fence is ideally suited to protect small areas with a single tent, food stash, or an off road vehicle.

Specifications:
• Electra Positive/Negative Mesh Netting (7/36/7) 7 Line Wires, 30’ Long x 36" High

#3094A - Electra Net 30' x 36" (7/36/7) ~4 LBS
$65.00 USD

ELECTRA NETTING (50' x 40") BEAR FENCE
Electra positive/negative netting is fast and easy to install. Features stainless steel conductors, 5 double pin step-in posts and semi-rigid vertical stays every 7 inches. This pentagon fence is ideally suited to protect areas with several tents, quads, or other off road vehicles.

Specifications:
• Electra Positive/Negative Mesh Netting (12/40/7) 12 Line Wires, 50’ Long x 40" High

#3095A - Electra Net 50' x 40" (12/40/7) ~7 LBS
$135.00 USD

ELECTRA NETTING (164' x 40") BEAR FENCE
Electra positive/negative netting is fast and easy to install. Features stainless steel conductors, 15 double pin step-in posts and semi-rigid vertical stays every 7 inches.

Specifications:
• Electra Positive/Negative Mesh Netting (12/40/7) 12 Line Wires, 164’ Long x 40" High

#3092A - Electra Net 164' x 40" (12/40/7) ~15 LBS
$199.00 USD

ELECTRA NETTING (164' x 48") BEAR FENCE
Electra positive/negative netting is fast and easy to install. Features stainless steel conductors, 15 double pin step-in posts and semi-rigid vertical stays every 7 inches.

Specifications
• Electra Positive/Negative Mesh Netting (14/48/7) 14 Line Wires, 164’ Long x 48" High

#3093A - Electra Net 164' x 48" (14/48/7) ~ 19 LBS
$225.00 USD

NICOPRESS WIRE TAP
Not a splice. Used to make all electrical positive and negative connections.

#3024 – Nicopress Wire Taps 100/Box
$48.50 USD

NICROPRESS CRIMPING TOOL
Multi-groove hand tool for pressing sleeves and line taps.

#3024A - Nicopress Crimping Tool
$49.95 USD

LIGHTNING CHOKE
Protects your charger from high voltage damage during electrical storms.

#3047 - Lightning Choke
$24.50 USD

CRIMPING AND CUTTING TOOLS
This tool comes complete with 100 aluminium oval sleeves and is used to make electrical connections.

#3011 – American Cable Cutter
The American always makes a clean straight cut and will do so for years.
$37.50 USD

#3012 – American Swagger - for 5/64" ovals
$37.50 USD

#3013 – 5/64" Aluminum Oval Sleeve (100/bag)
$9.40 USD

CABLE CLAMP
These clamps are used to connect wire strands and are resuable.

#3025A – Cable Clamp (each)
$0.20 USD

SPLIT BOLT
These stainless steel split bolts are used to connect wire strands and are resuable.

#3025B – Split Bolt (each)
$2.10 USD

WIRE ROPE GRIP
Designed for quick tie offs and slicing of the stranded wire cable. These “grips” are reusable, do not require tools, and are the means of tensioning wire.

#3022 - Wire Rope Grip
$3.25 USD

#3023 - Gripple
$1.99 USD

TENSULATOR
The Tensulator is a 4-in-one device that joins, tensions, anchors and insulates electric fencing. This system installs four times faster than traditional methods, is easy to use, can be tensioned and re-tensioned and is made from non-corrosive components for insulation and longer life. Once installed it maximizes the life of the wire by retaining its tension, insulates the wires from each other and acts as an anchoring device to the end post.

#3023B - Tensulator (Each)
$3.60 USD

TENSIONING TOOL
Tensioning tool for use with Gripples (#3023), Tensulators, and Wire Rope Grips (#3022). Easier tensioning up to 400kg (800lbs) with 6:1 gear drive and mechanical advantage. Lightweight (only 750g), ergonomic, compact and easy to carry. Durable, made from hardened steel and engineering grade polymer.

#3023A – Gripple Tightening Tool
$97.50 USD

WIRE TIGHTENER
This heavy duty zinc plated metal strainer performs in all weather conditions. It
is installed without splicing wire. An economical strainer tool is also available.

#3039 – Tightener
$4.00 USD

WIRE STRAINER TOOL
This tool is in conjunction with #3039 wheel tensioners. The Wire Strainer Tool (#3040) is inserted into wheel and is used to turn the wheel to tighten the fence wire.

#3040 - Wire Strainer Tool
$17.50 USD

14 ga HOOK-UP WIRE
This double insulated 14 gauge hook-up wire is available in 50 foot rolls.

#3051– Hook-Up Wire 14 Ga. (50' Roll)
$17.50 USD

12.5 ga HOOK-UP WIRE
This double insulated, polypropylene covered 12.5 gauge wire is available in 165' rolls. It has many uses: under driveways, gate entrances or to insulate one wire from another.

#3052 – Underground Hook-Up Wire 12.5 ga. (165' Roll)
$58.00 USD

TENSION SPRING
Tension springs have multiple uses. They act as a shock absorber by damping damaging blows to the fence. They also help maintain uniform tension of the fence wires through the heat and the cold. In addition, they can help indicate the amount of tension on the wires.

#2047 – Tension Spring
$10.00 USD

#3019 – Pounder and Puller
$95.00 USD

#3019A – Post Pounder
$59.00 USD

GROUNDING PRODUCTS
Proper grounding is essential for an effective fence. Ground rods are the most common way to ground an electric fence. Choose from a standard 3/4" diameter or a "quick" 1/2" diameter ground rod. The 1/2" quick ground rod has a built-in pounder. Ground plates are often used where terrain makes it difficult or impossible to drive in a ground rod. For better grounding extra ground rods and/or plates may be added.

#3048 – Ground Rod 3/4" x 6'
$14.00 USD

#3048A – Quick Ground Rod 1/2" x 30"
$15.00 USD

#3049 – Ground Plate
$16.00 USD

Ground Clamps
The most common failure of electric fencing is poor connection at the ground rod. These single bolt bronze clamps guarantee proper connection.
#3050 – 3/4" Ground Clamp (used with #3048 or #3049)
$4.90 USD

#3050A – 1/2" Ground Clamp (used with #3048A)
$2.80 USD

GATE HANDLES
This spring gate handle has an extra heavy hook and lots of hand grip. Available in black or red.

#3021 - Gate Handle
$2.75 USD

RUB'R GATE HANDLES
RUB’RGATE soft pliable rubber outer case internally reinforced with semi-rigid, non-conductive vinyl inner tube. This provides a firm grip and acts as an extra layer of insulation. Generous, sensibly spaced flanges allow plenty of hand room. Large, heavy stamped steel plated safety hook. Enclosed spring stretches 3½” to keep wire taut.

#3021D - RUB'R Gate Handle
$2.95 USD

OLD IRON SIDES GATE HANDLES
Safety hook and body formed as one from 7/8” diameter steel pipe. Spring mechanism consists of 41/4” long compression spring fastened to a 5/16” diameter eyebolt. All metal parts permanently assembled using 20 tons of force. No flimsy snap-on/push-on fasteners used anywhere. Large insulating grip measures 5 1/8” long with a 2 1/4” diameter flange for extra shock protection. Molded of a soft flexible material that will not chip, crack or break when abused. Performs in any climate. Metal parts plated to resist rust. Molded grip contains carbon black to deter UV rays. The heaviest, toughest DARE electric fence gate handle ever.

#3021C - Gate Handle
$4.95 USD

SLINKY GATE
Stretches to fit gate opening up to 20 feet. Retracts to keep gate off ground when open. Electrified when closed, neutral when open. Highly visible and effective, complete with schematic and instructions.

#3021A - Slinky Gate
$18.25 USD

ELECTRIC FENCE WARNING SIGNS
These signs are made of highly visible, bright yellow vinyl with bold black lettering. There are corner holes for wiring to fence or nailing to post.

#3032 – Regular Sign
$1.55 USD

DIGITAL ELECTRIC FENCE TESTER
Suitable for measuring between 100volts and 9900volts.

#3009 - Digital Fence Tester
$90.00 USD

ANALOGUE ELECTRIC FENCE TESTER
Professional analogue electric fence tester. Premium quality for electric fences and energizers including low impedance models. Easy to read display, no battery required. Bonus! Storage pouch included.

#3009A - Analogue Electric Fence Tester
$85.00 USD

FIVE O-LITE ELECTRIC FENCE TESTER
Standard 5 Light Fence Tester, for use with fence energizers with peak voltage of up to 5000 V. Lights glow in sequence to indicate approximate voltage. 1000V to 5000V readings

#3008 - Five O-Lite Electric Fence Tester
$15.00 USD

HELIX ANCHOR
Galvanized screw-in helix anchor (4" x 24") 5/8" shaft. Pull out strength is 4,000 lbs. Used to tie back corner braces in difficult ground (rocky/gravel soil).

#3033 - Helix Anchor
$18.50 USD

SMALL POST BAG
Used to transport or storge line posts, corner posts or ground rods. Ideal for the ultra portable system. Made from durable canvas and measures 61" x 7" x 6".

#3030G - Small Post Bag
$25.00 USD

LARGE POST BAG
Used to transport or storge line posts, corner posts or ground rods. Ideal for the heavy duty portable system. Made from durable canvas and measures 73" x 7" x 6".

#3035C - Large Post Bag
$25.00 USD

TOTE BOX
Used to transport fencing material, this super tough tote box measures 24" x 16" x 16.5".

#3035B - Tote Box
$15.00 USD

click here for
INSTRUCTIONS

ANIMAL ELECTRIC FENCE ALERT ALARM SYSTEM
Maximize the effectiveness your existing electric fence. The alarm system is activated when the bear touches the hot wire. The bear receives a shock which causes a short on the fence wire, simultaneously tripping the siren. The audio stimulation frightens the bear and, more importantly, alerts camp personnel of the bear’s presence. This system comes complete with alarm control box, siren, and 12-volt dry cell battery (battery will provide 50hrs of continuous siren operation). It can be rigged with any alarm device (ie. lights, security monitors, etc.) that is triggered by a switch closure. Also ideal for monitoring the perimeter of game (deer/elk) fencing.

#4001 - Animal Electric Fence Alert Alarm System
$235.00 USD

#4001A - Animal Electric Fence Alert Alarm System In Weather Resistant Dry Box
$269.75 USD

#4007- Replacement 12V Dry Cell Battery
$27.50 USD

#6065 - Dry Box Only
$19.75 USD